Engines & Steering

• Yanmar 4 cylinder 4JH3-TE 75HP marine diesel engine.
• Flexible engine mounts
• Racor fuel filter.
• Engine room blower
• Lead foam insulated engine room.
• Raw water strainer for engine intake.
• Antisyphon valve.
• 0.Muffler/water lock system.
• Shaft strut with cutlass bearing.
• 1-1/2″ Stainless steel prop shaft with three blade bronze propeller.
• Stuffing box.
• One black steel fuel tank capacity 120 gallons.
• Drip less shaft gland.
• Steering pedestal.
• Stainless steel “destroyer” type steering wheel.
• Emergency steering system with tiller.
• Rudder bearing.
• Bronze rudder shoe skeg mounted rudder.
• Vetus bowthruster 95kgf

Spars & Rigging

• Aluminum mast & boom.
• Halyards: main, genoa, staysail & led internally.
• Internally led topping lift and out haul.
• Double spreaders.
• Anchor light.
• Combination deck steaming light.
• Stainless steel standing rigging with swaged fittings.

Electrical

• Electrical panels.
• D/C panel sections include volt and amp gauges, circuit breakers.
• Full gauges for AC and DC panels.
• 110/240 volt shore power system, with master breaker and circuit breakers.
• 110/240 volt outlets throughout.
• 110/240 volt Ground Fault Interrupter outlets in both heads.
• Newmar 40A Battery Charger
• Two 12-volt 120AH batteries & Fibre re-inforced plastic. boxes.
• Heavy duty battery selector switch.
• Internal bonding system to all chain plates, thru hulls, engine and rudder systems.
• Zincs as required.
• Numerous overhead cabin lights designed to interior lighting plan.
• Engine room light.
• Chart table light.
• Running lights to international rule.
• D/C reading lights.
• D/C outlets throughout.

Sails & Canvas

• Ulmer Kollius or equivalent mainsail with 2 reef points & cover.
• Ulmer Kollius or equivalent Yankee with bag.
• Ulmer Kollius or equivalent staysail with bag.

Deck Fittings

• Non-skid side decks and cabin house top.
• Electric Windlass Maxwell V2200
• Solid teak cap rail.
• Six custom Stainless steel mooring fairleads.
• Six Stainless steel mooring cleats.
• Stainless steel double bow & stern pulpits.
• Stainless steel stanchions with custom bases.
• Stainless steel boarding gates port & starboard.
• Double life lines.
• Stainless steel cockpit drains.
• Two cowl vents for the master stateroom.
• Two deck ventilators and 1 motor fan over galley.
• Five Lewmar or equivalent, aluminum overhead hatches.
• Stainless steel opening ports.
• Four custom fixed windows.
• Aluminum genoa and staysail tracks with cars.
• Main traveler with roller car.
• Deck organizers.
• Sheet stoppers.
• Teak cockpit sole and bridge deck.
• Fiberglass molded propane storage compartment for two tanks.
• Two molded coaming compartment.
• Teak companionway doors.
• Companionway drop boards and sliding hatch.
• Reverse transom with swim platform & boarding ladder.
• Teak exterior handrails.
• Stainless steel double bow roller with stem head fittings.
• Deck saloon (option).
• Fibre re-inforced plastic seahood.
• Instrument console mounted on seahood.

Winches

• All winches are Lewmar Self Tailing:
• 2- Two-Speed #54CST Genoa (primary) winches.
• 1- Two-Speed #40CST main sheet winch.
• 2- Two-Speed #40CST secondary winch.
• 1- Two-Speed #40CST halyard winch.
• 2- Two-Speed #40CST halyard winch.
• 4- 10″ Locking winch handles

Plumbing

• One 120 gallon stainless steel or aluminium fuel tank.
• Stainless steel water tanks with baffles, total capacity 230 gallons.
• Hot water heater (110/240 volt & engine heat exchanger).
• Hot & cold pressure water system.
• Refrigeration system 110/240v AC
• Faucets in galley & heads.
• Large Stainless steel double sink in galley.
• Two large heads with showers.
• Automatic sump pump for showers.
• Large Stainless steel sink in each head.
• Manual toilet in each head.
• Holding tank & piping for waste disposal in each head.
• Macerator and pump for holding tank.
• Bronze ball cocks/thru full fittings bonded to ships system.
• Electric 12 volt bilge pump with automatic float switch
• Manual bilge pump.

Interior Fittings

• Teak joinery & cabinetry throughout.
• Teak & holly cabin sole.
• White formica counters in galley, teak veneer chart & dinette table tops.
• Teak framed mirror in head(s).Interior teak handrails.
• V-berth filler if applicable.
• Cloth cushion covers.
• Ice chest 4″ foam, stainless steel lined.
• Interior varnish, polyurethane satin.
• Stove alcove, stainless steel lined.
• Removable formica overhead with teak battens.
• Teak fiddles and teak trim on counters & tables.
• Four inch foam cushions.
• Solid teak doors & frames.
• Poured foam insulated refrigerator & freezer compartments.
• Stainless steel lined stove area.
• Deep double Stainless steel sinks.
• Formica counter tops.
• Trash bin. (optional)
• Numerous drawers, lockers and dry storage bins.
• Numerous removable floor boards.
• Hand rubbed satin varnish on all interior teak surfaces.